Mattthev... i'm just checking out on your site for the BiosMod program and just wanted to know before I run your 2.2 program for my RX570 & 580 cards should I flash back the original BIOS for each card?
if so, ok.... and then i'm guessing steps would be use your 2.2 to flash all my cards (one at a time), then DDU AMD drivers? reboot and install updated AMD adrenaline drivers, DAG patcher, reboot...?
I used the One Click BIOS mod program and just finding it not giving my RX570 & 580 4GB cards much more then 24-25 MH also having issues bringing GPU watts down.
I'm hoping your program will fix my issues.
Tks
Kevin
Gentlemen if you are having issues with claymore 11.x that you didn't have with 10.x but it want to mine keccak or verge do this. Upgrade to 11.5 which was just released. You need to add "-oldkernels 1". You will have your stability back with no incorrect shares and a small speed bump too!
I have one micron card doing 32.2 and 245 keccak. 1215/2200 at 900mv
Great result and good tip.
Hello Matthev,
I have 6 rx cards 5 msi 1 gigabyte.
The gigabyte one is causing lot of troubles for me, it has hynix memory i tried couple of mods to make it run good. For now i can only get 28mhz tops with 109watt. I want to reduce the watt but its quite hard.
I tried to buy from ur store but i couldnt find Gigabyte RX580 Gaming 4GB.
You can use this guide for modding or buy the PBE 2.2 if you want better timings. 109W at wall is good result, but if you undervolr it might be better also VDDCI undervolting saves you few extra watts.
I hope that I will start adding more bios in next couple of weeks.