Today i will be preparing Raven x16r miners for AMD and Nvidia.
I got 2 main questions for this system.
1- I got 22 Rigs and i want to use SM for all of them.Do i need to copy USB stick for each of them one by one or i can create one and is there a way to clone them fast? I tested only one with Etcher program worked fine but for all 21 rigs it would a while to do it.
2- I use Rx 580 cards for my rigs from different brands but the one i tested was Saphire Rx 580.I get 22 Hashrate from them without setting overclock on SM and even i change values it remains same and even some of them goes lower to 19.All my cards are on default they are not modded.Do i need to mod them on windows in order to use with SM @ hasrates around 29-32 ? They said SM does overlock auto but i couldnt see any boost.
Also , if i want to start all 22 rigs can i use 3 days trial for all of them or i need to deposit right after i started to use it ? One more question , is it possible to pay monthly fees from my ETC or ETH balance ?
Thanks much for the help.
1. just use this command:
sudo dd status=progress if=/dev/sda of=/dev/sdb bs=8M
/dev/sda (the USB with SM image )
/dev/sdb (the USB with nothing)
But i recommend you using a SSD (cheap or second hand), because USB is not good for using long, almost my USB died after one month. ( I think it's because claymore write to USB all time )