Re: GekkoScience Terminus R808 Miner Official Support Thread
Somebody had asked how to set up more than one Terminus on a single power supply. Here is a pic of mine running on a 200 watt adjustable supply using the PCIe connectors (very solid connection). Testing with a small fan mounted over the Regulator on the right one to keep it cool.
237.50Mhz / 98-103GH/s each.
https://imgur.com/a/FPfMe
237.50Mhz / 98-103GH/s each.
https://imgur.com/a/FPfMe
hello,
how are you getting more gh/s than me when i clock mine higher than yours? https://i.imgur.com/4NoB85b.jpg
is it just my luck on the with the chip draw or is it something of my doing?? thanks in advance
I did notice a slight increase when I switched to the PCIe connector instead of the barrel connector. More stable current to the chips maybe?
It also does fluctuate for me but not that low and the fact that all of yours are around the the high 80GH/s to low 90GH/s would not mean "luck of the draw". I would try to separate just one miner on it's own system/controller to see what it ramps up to. That way you can rule out that it's the POD but maybe the controller.