Testing is ramping up, and I'm happy to say the first units are out the door. I would expect that a lot more will be moving out tomorrow and Wednesday.
As for bad boards and chips, not as far as I am aware. We did have an issue with a couple shorts in the first 10 made before the assembly house made a change on the solder stencil, but those were reworked and are now good. Additionally I don't think there have been any chips that have failed outright, although we did lose two somewhere. One of us is now stuck with a 6 chip board until the assembly house finds the two that fell off the pick and place machine and reworks them back onto the board.