Re: [Work in progess] Burnins Avalon Chip to mining board service

I use this settings --avalon-options 115200:16:10:d:274 --bitburner-voltage 1270

Hello,

Just installed my BB Bitfury
I adapted your settings and have also ~48 GHash/s per board. THX for that.
Is there any collection of good settings out there?

and what about the "10" in the avalon-options? there are 2 rows with "8" chips, so I tested "115200:16:8:d:274" with no difference.

Greetings

The second 10 is always fix. It means one row of chips. A bitburner x has 1 row and a bitburner xx has 2 rows. But bitburner x and bitburner xx both are counted as 2 x 10 rows. So if you have 6 bitburner x or xx then you use 12:10 which means 12 times 10 chip rows. Its only for delivering the work or so.

The Bitfury boards have only 16 chips but nobody knows what settings to use.

Oh, sorry... overread that. Thats something kano should answer most probably. Its best to ask in his cgminer-thread i think.

I don't expect kano to comment without having the actual hardware in hands. Our only hope is burnin or maybe cryptx.

Yeah I've only seen the commit changes.
No hardware.
The driver seems to be only a minor change on the Avalon chip board.
(it's in current cgminer)