Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: Can't determine problem with rig... Advice needed.
by
beachfrontnoob
on 30/03/2018, 18:26:24 UTC
Quote from: beachfrontnoob on March 30, 2018, 03:53:42 PM
Quote from: leonix007 on March 30, 2018, 02:04:39 PM
Quote from: beachfrontnoob on March 30, 2018, 07:14:13 AM
I might murder my rig...

 my whole system freezes up and I have to hard reset. When isolating the GPUs this still occurs.  Does not matter if I have one running or all 6.

Have you tried using one GPU directly plugged PCI-e x16 slot on the board, then fire up miner?


Quote
I suspect that is it my motherboard or power supply.


If the above setup runs successfully, you either have a bad riser or power supply issue


I have not tried that. I will do so shortly and report back.


So I attempted to put one of cards on the PCI-e 16x slot, and it worked fine.  Hashed without issue.  However, I do not believe it is the riser.  I have swapped out MULTIPLE risers and still had the same issue.  So you think it is the power supple then??