KnC 0: | 71.37G/231.7Kh/s | A:17372 R:4 HW:8355 WU: 0.0/m
bummer
eligius is showing 2013/10/18 14:48:45: 675 seconds: 34741.51
34.7GH/s
Oh well, I'm going to shut it down and inspect the board with a loupe and check out its thermal paste or tape.
Which firmware? Did you update the firmware that it shipped with?
Well, added a second 12vdc switching supply, each good for 360 watts and the Mercury is only drawing 144, no now down to 142 watts, many cores being disabled due to 10 HW errors in a row.
KnC 0: | 90.66G/62.23Gh/s | A:2182 R:43 HW:2798 WU:1310.6/m
Will see how it looks after an hour, meanwhile I'll readup on installing bertmod before upgrading as I heard it wasn't working on 0.96 but maybe that's changed.
Firmware 0.95 and no I have not upgraded. Temp in the room is cool, 70.2°F (think that's 21.2°C) and the miner is
HW status:
ASIC slot #1: -
ASIC slot #2: -
ASIC slot #3: -
ASIC slot #4: -
ASIC slot #5: 30.5 ℃
ASIC slot #6: -
Hardware errors 14505 while accepted 34415.
Shutting down.