Ok, running continuously at say 250 mhz? or higher? My setup is 6 2pacs, 2 2pacs/powered usb hub running at 200 mhz. holding the 2pac with the usb port down, the screw is set to 5 Oclock. They do not run continously. Don't know why?
Like I wrote a few times before, I have two 2Pacs. Each one in a 30 W Hub. Both running at 350 MHz. Voltage pot is set about 6 or 7 o´clock. Each one cooled with a Arctic Breeze fan. Both controlled by one RPi with cgminer.
I have a problem that cgminer shows different in EU. It's more log rather than US is like "window".
https://i.imgur.com/ZN38SuA.pngAnd the EU:
https://i.imgur.com/HQK3oWf.pngThe question is, how could I switch between this to views? In some cases I need to work with the first one, in other moments I need the second one with log format.
I'm running the same command in two cases, for me is a mystery why in one rpi are showing in log format.
Can you post the cgminer.conf file you are using? Does it have the --text-only option? Or do you start with this option? The option -t is the same? Do you use this one?
