Hey,
Thanks for the tip.
Repeat of the same.
On just the PS with the mb cable jumped - I get 1-4 revs of the PS fan, then nothing. It's like something clicks off in the PS as soon as it ramps up.
On the PS with one board attached - I get 1-4 revs of the PS fan, the board fan, and the two case fans, then nothing. Same kind of behaviour, almost like something clicks inside the PS as soon as it begins to ramp up.
Repeat for all boards.
Thanks for the tip.
Repeat of the same.
On just the PS with the mb cable jumped - I get 1-4 revs of the PS fan, then nothing. It's like something clicks off in the PS as soon as it ramps up.
On the PS with one board attached - I get 1-4 revs of the PS fan, the board fan, and the two case fans, then nothing. Same kind of behaviour, almost like something clicks inside the PS as soon as it begins to ramp up.
Repeat for all boards.
It's the PS.
Unplug everything, If it's a modular PS, unplug all the cables but the MB/24 pin cable.
1. Turn on the PS and try sticking in the paper clip again between the green and one of the black wires. As you stick it in, wiggle it -- see if the PS fan goes on. I'll be refreshing the page
