I have 2 Rigs and im using this command: -xpool XXXXX -xwal XXXXXX -xpsw XXXXX -pow7 1 -dmem 1 -h 896
- x6 MSI 4G RX570 -> 2.4 mhs (cap to exactly 400hs each)
- x5 NITRO 4G RX570 -> 3.6 mhs (720~ each)
Both rigs running at 950core/2000mem and BIOS modified timmings (by polaris app).
I think its a bit weird same command and very different results with this new claymore, if i switch to xmrig or xmr-amd-stak everything is fine!
The only way to make the MSI rig faster is by adding -dmem 0 and -h 632 and that gives only about 3.7mhs(vs 4.2 on other miners app) which still very low considering it has one more gpu than the other rig ...
why are you running your core and mem so low?
my MSI Gaming X 570 4GB is getting 890h/s
1150 core, 2010 mem. 925mv for both.
the H value is like 890 or whatever i just copied someone from a previous comment had had success.
In my experience mining XMR core/mem almost doesn't affect the hashrate but it does to the wattage. I got almost same hashrate with 950 or even 1200 but wattage increase a lot.