So you say:
1) Sold pin on BIOS chip;
2) Turn windows on (i've read Dos is better, should i use it?);
3) Flash the original bios;
4) Turn off system.
5) unsold.
Am i right?
1) Solder wire between pin 1-8 on BIOS chip(suggest that you check your BIOS chip datasheet in case its a different chip, you need to turn CS high(to positive/VCC) in order to disable BIOS);
2) Turn windows on;
3) When windows finished booting, clip of the wire(now the BIOS will be enabled, but GPU will not read content from it)
3) Flash the original bios;
4) Turn off system.
5) unsold.
this kind of information while good to know, should never be handed to a noob in which you know not there skill level. all your doing is giving him/her the tools to screw his/her gpu up more than it already is, and not to mention your instructions are very vague that said, id bet he/she would screw it up trying this. your assuming he already knows certain things which by the sounds of it he/she does NOT, he/she isn't going to know what pins 1 or 8 are on the bios chip, then theres the soldering part which being that its a small chip its easy to accidently bridge two pins together being a noob. theres lots of needed information that you DIDNT include, like how to determine which pins are 1 and 8. what an ass move to give someone poorly done instructions that will do nothing more but increase there chance of messing up the gpu more