Interested in how this is working with cgminer. Anyone using it successfully? Did cgminer find it on its own?
Yes cgminer should hot plug it.
You have a spelling error in your Wheezy install instructions
Essential was spelled wrong should be
sudo apt-get install build-essential
Fixed, thanks.
Just don't use -S :all
This tells BFGMiner to probe every port for the device.
Erupters can't handle BigPic probes, and BigPic can't handle Icarus probes.
I understand that to mean that you can't probe (:all) if you have both. You can still specify each serial port manually. I was asking if there's an alternative.
Currently I don't think so, you will need to specify the com port.
switched to your specific Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH
Look like these are performing 20% lower than spec.
Can you please try minepeon 0.2.4 on your raspberry pi. Arch is a lot better then raspbian. Also how is it connected up is it directly connected to the raspi?