Quote from: klondike_bar on November 03, 2013, 01:34:04 AM

Quote from: Jumpsu on November 02, 2013, 12:50:11 PM

Okay, i made changes to settings, problem not solved...

And this is what i get...:

1 aIfDSo 54 1.990 2.124 139 2 0 1 201 [4:0] 629 9 9 9 9 9 9 $
2 aIfDSo 54 1.976 2.146 138 6 0 0 203 [4:1] 632 9 9 9 9 9 9 $
3 aIfDSo 54 2.090 2.114 146 0 0 0 200 [4:2] 622 9 9 9 9 9 9 $
4 aIfDSo 54 0.172 2.051 12 115 0 0 194 [4:3] 745 0 1 0 1 0 0 $
5 aIfDSo 54 1.675 1.998 117 80 0 0 189 [4:4] 650 7 7 7 7 7 7 $
6 aIfDSo 54 2.105 2.209 147 1 0 0 209 [4:5] 618 9 9 9 9 8 9 $
7 aIfDSo 54 2.162 2.156 151 3 0 0 204 [4:6] 617 10 10 10 9 9$
8 aIfDSo 54 2.205 2.241 154 20 0 0 212 [4:7] 620 10 10 10 10 $
9 aIfDSo 54 1.861 2.167 130 0 0 0 205 [4:8] 636 8 8 8 8 8 8 $
10 aIfDSo 54 1.976 2.220 138 5 0 0 210 [4:9] 627 9 9 9 9 9 8 $
11 aIfDSo 54 2.319 2.220 162 2 0 0 210 [4:A] 608 10 11 11 11 $
12 aIfDSo 54 1.861 2.051 130 14 0 0 194 [4:B] 639 8 8 8 8 8 8 $
13 aIfDSo 54 1.890 1.860 132 30 0 0 176 [4:C] 634 8 8 8 8 7 8 $
14 aIfDSo 54 2.119 2.135 148 3 0 0 202 [4:D] 623 9 9 9 9 9 9 $
15 aIfDSo 54 2.019 2.156 141 16 0 0 204 [4:E] 627 9 9 9 9 9 9 $
16 aIfDSo 54 2.276 2.198 159 42 0 0 208 [4:F] 614 10 10 10 10 $
17 aIfDSo 54 2.233 2.135 156 0 0 0 202 [8:0] 616 9 9 9 10 10 $
18 aIfDSo 54 2.033 1.966 142 46 0 0 186 [8:1] 632 9 9 8 8 8 8 $
19 aIfDSo 54 2.176 1.945 152 21 0 0 184 [8:2] 618 10 10 10 9 9$
20 aIfDSo 54 2.162 2.051 151 29 0 0 194 [8:3] 615 9 9 9 9 9 9 $
21 aIfDSo 54 2.147 2.156 150 19 0 0 204 [8:4] 625 9 9 9 9 9 9 $
22 aIfDSo 54 1.933 1.934 135 47 0 0 183 [8:5] 644 8 8 8 8 8 8 $
23 aIfDSo 54 1.761 1.934 123 20 0 0 183 [8:6] 640 8 8 8 8 8 8 $
24 aIfDSo 54 0.601 2.146 42 555 0 0 203 [8:7] 719 3 3 4 1 2 2 $
25 aIfDSo 54 2.348 2.156 164 22 0 0 204 [8:8] 605 10 10 10 10 $
26 aIfDSo 54 2.520 2.051 176 0 0 0 194 [8:9] 590 11 11 11 11 $
27 aIfDSo 54 2.119 1.945 148 51 0 0 184 [8:A] 625 9 9 9 9 9 9 $
28 aIfDSo 54 2.033 2.051 142 18 0 0 194 [8:B] 626 9 9 9 9 9 9 $
29 aIfDSo 54 1.933 2.040 135 0 0 0 193 [8:C] 628 8 8 8 9 9 9 $
30 aIfDSo 54 2.062 1.934 144 11 0 0 183 [8:D] 625 9 9 9 9 9 9 $
31 aIfDSo 54 1.775 2.008 124 0 0 0 190 [8:E] 638 7 7 8 8 8 8 $
32 aIfDSo 54 2.062 2.029 144 10 0 0 192 [8:F] 625 9 9 9 9 9 9 $
33 aIfDSo 54 2.004 2.230 140 32 0 0 211 [C:0] 634 8 8 8 8 8 8 $
34 aIfDSo 54 2.176 2.146 152 35 0 0 203 [C:1] 619 10 9 9 9 9 9$
35 aIfDSo 54 1.761 1.966 123 56 0 0 186 [C:2] 648 7 7 7 7 7 7 $
36 aIfDSo 54 2.348 2.177 164 44 0 0 206 [C:3] 614 10 10 10 10 $
37 aIfDSo 54 2.334 2.167 163 8 0 0 205 [C:4] 603 11 10 10 10 $
38 aIfDSo 54 1.546 1.522 108 0 0 0 144 [C:5] 652 7 7 7 7 7 7 $
39 aIfDSo 54 2.147 2.283 150 52 0 0 216 [C:6] 624 9 9 9 9 9 9 $
40 aIfDSo 54 2.190 2.167 153 33 0 0 205 [C:7] 621 9 9 9 9 9 9 $
41 aIfDSo 54 1.331 2.272 93 71 0 0 215 [C:8] 677 6 5 6 8 4 6 $
42 aIfDSo 54 2.276 2.241 159 23 1 0 212 [C:9] 613 10 10 10 10 $
43 aIfDSo 54 2.076 2.135 145 1 0 0 202 [C:A] 628 9 10 10 9 9 $
44 aIfDSo 54 2.634 2.167 184 25 0 0 205 [C:B] 593 11 11 11 11 $
45 aIfDSo 54 2.448 2.177 171 3 0 0 206 [C:C] 598 11 11 11 10 $
46 aIfDSo 54 2.391 2.124 167 12 0 0 201 [C:D] 613 11 11 11 11 $
47 aIfDSo 54 2.233 2.262 156 0 0 0 214 [C:E] 613 10 10 10 10 $
48 aIfDSo 54 2.162 2.103 151 2 0 0 199 [C:F] 617 9 9 9 9 9 9 $
speed:2592 noncerate[GH/s]:96.651 (2.014/chip) hashrate[GH/s]:100.665 good:6751 errors:1585 spi-errors:1 mis$
4: 864 30.695 34.045 2144 339 0 1
8: 864 31.897 32.481 2228 849 0 0
C: 864 34.059 34.140 2379 397 1 0

Voltage still 0.3V

I measured resistors,
R01F: 2,120K ohm
R02F: 2,120K ohm
R01S: 3,3 ohm
R01L: 14,66K ohm
R01A: 98,80K ohm
R01B: 2,5 ohm
R02E: 68,90K ohm
R01E: 68,80K ohm
R01T1:187,3K ohm
R01T: 146,7K ohm
R01M: 219,8K ohm

..so Ti chipis broken...?

1) switch to autotuning. clearly setting manual tuning to 54 across every chips is working terribly based on your 15-30% error rates.
2) R02F is quite high at 2.12K(ohm). try using the pencil mod to reduce it to 1.85K(ohm) and see what happens. If lucky, this is the issue and youll see the voltage rise to >0.6V. If it does, maybe the wrong resistor was placed and you should see if it can be changed for something in the 1.65-1.8K range

1. As you can see, m-board don't even detect BANK1 h-card(s). It is autotune mode now, but no help..
2. If I do pencil mod that, that will broke h-card warrantly...?