Quote from: Pertinax on April 15, 2018, 04:19:23 PM

Hi everyone,

I am currently facing a problem while setting up my first mining rig. I've already done a lot of research, without any success. Help would be very appreciated

My GPUs (rx 570 4gb) are not detected when I use x1 --> x16 pci-e risers. However, they are when I connect them directly into the pci-e x16 slot (on MB).
My motherboard is an Asus z270-a and this is what I already tried :

1. Activated 4G in BIOS
2. Set pci-e settings to auto and then in GEN2
3. Tried with different risers and SATA to Molex cables (I have got 6, at least one of them should work)
4. Updated the MB

My power supply has 1000W, and I am almost certain that my risers are correctly powered.

I am running W10 and tweaked it with a tool (and already runned DDU as well)

Whose PSU are you using and what efficiency does it have? Those NoName PSUs often cheat with their output power claims.