I tried running these just now briefly At 375mhz and 383mhz, both settings returned 0ghs, what could be the issue? They run fine on 350mhz and below.
Also what are the hard coded and supported frequencies? Can I choose like 355 and move on up to see how they perform? I got these running at 39-40c at 35mhz and can probably push them
Mine do the same thing when I try 375mhz. I asked zipiju about it in the Klondike thread and here is what he said:
The current draw from the 1.2V regulators is probably too high and they are shutting down as soon as clock signal is enabled to the chips - which is with first work item. So try something lower, like 370 or 365 and it should work.
Chad