There's another Amtel package that needs to be installed, from repository.
Unfortunately, the re-flash did nothing to help my 1.4GH/sec fury. It's still only getting 1.4GH/sec.
I appreciate your efforts, Beastlymac. Looks like I am going to have to box this thing up and send it to SSINC for replacement.
Unfortunately, the re-flash did nothing to help my 1.4GH/sec fury. It's still only getting 1.4GH/sec.
I appreciate your efforts, Beastlymac. Looks like I am going to have to box this thing up and send it to SSINC for replacement.
same here, installed the required package ( on ubuntu, sudo apt-get install dfu-programmer )
ran the update script ( needed to run as root so, sudo ./dfu-prog.sh ) #spent 5 mins trying to work out why it wasnt finding the fury
upgraded each of the BF's one at a time, all successful.
four of my five are acceptable (at 2.2-2.4GH/s)
The lazy one is still below 2.0
my buddies one refuses to work, it reports hashing at 2.3GH/s however does not get any results accepted (invalid nonce), when mining using just his bad BF, the difficulty at 1 there is the occasional accepted result but 98% hardware error (using bfgminer 3.5.1). I flashed it however no change.