I have a Silverstone Strider Essential Series ST60F-ES, it has 4 PCIE connectors, if each PCI connector has only 75W and each klondike uses 60W wont I be able to only use 1 per connector rather than split each connector? I thought originally each Klondike would consume 32W, but steamboat says the F16 uses 60W. Any advice on this? Will I be able to power 8 K16's with this power supply or only 4
One of those 4 connectors is a 6+2 pin, which is designed for 150W. Assuming they use the same gauge wiring on all the cables, it should be safe to pull 150W from each 6-pin's as well (both 6 and 8 pin connectors use only 3 positive wires). Though I suppose the PSU's internal connections could be poorly designed. The PSU can do a total of 500W on the single 12V rail, so I'd say you can probably run 8 K16's without problem.