https://i.imgur.com/t5H7Y7f.jpg photo 1
https://i.imgur.com/LVbLGbT.jpg photo 2
Hello guys,
I connected two risers on the same SATA cable, is this correct? photo 1
https://i.imgur.com/t5H7Y7f.jpg photo 1
I read that it has to be 1 sata cable for each riser, otherwise it will catch fire or melt

I also connected the power cable to the PCIE auxiliary connectors, photo 2
https://i.imgur.com/LVbLGbT.jpg photo 2

Is it correct or does it need to connect the auxiliary cables?

can I connect the 4-pin auxiliary cables directly to the riser?
https://i.imgur.com/LVbLGbT.jpg photo 2

they are saying that the adapters that come along with the riser are bad ...

my system should be consuming at most 400w but my no-break does not stop making those cracking noises, as if the electric current was varying a lot

my no-break is an SMS net4+ 1400Va, 400w for my no-break is almost nothing!

What stabilizer do you recommend? taking into account that I have 2 video cards and in the future I will have 6