Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.6
by
deathlire
on 22/04/2018, 19:50:35 UTC
Hello,got some question.
On v7 algo,what i should to oc between core clock or memory clock?
thank you.

core by 5-10Mhz until it's no longer stable..then if you want put a little more volts into it until stable..
once you reach where both kill it.. go back about 10Mhz and maybe even lower volts a bit..if you are going
for extreme anyways, also watch for heat..but huge heat isn't a good thing..means more power wasted..
when sometimes you can get the same with clocking lower.
thank you.
Is this for oc GPU clock or Memory clock?

GPU Clock is raised until things just refuse to work properly, then you can up the core voltage to keep going up until it is no longer stable there either.. don't raise voltage by much, since it can be devastating to your card or motherboard even..

Raising up GPU core clock until stable as normal, and then raising the memory clock until it stays stable without touching voltages may be better in your case.  Try to learn about GPU OC'ing either from tomshardware or youtube ..pretty much anywhere with google.. Hope this helps Smiley

*NOTE* Don't play with voltages until you know what you are doing seriously.  Also I hold no responsibility for what I've said in this post. Tongue