http://randomcontent.wolfnexus.net/RandomSite/reflashing-a-butterfly-labs-jalapeno-with-only-a-raspberry-pi/

I followed Red_Wolf_2's instructions and when I run jtag>detect I receive "warning: TDO seems to be stuck at 0error: not found: queue is empty"

I am connecting the pins based on the circuit board markings meaning:
 
pin 1 on jalapeno is the closest pin to the nearby edge and pin 9 is in the same 5pin row

pin 2 on the raspberry pi is the closest to the nearby edge, pin26 is in the same 13pin row

Am I doing something wrong with the cable connections, I am using old internal cd rom to sound card 3/4 pin cables
Could it be a software problem? I think my jalapeno is fairly typical with the cut heatsink and firmware 1.0.0

Thank you in advance