Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.7
by
albertlee81
on 23/04/2018, 17:40:09 UTC
Very bad: Vega 64 Cryptonight V7

[2018-04-23 23:25:53] Pool accepted result 0x000059B4
[2018-04-23 23:25:55] Pool accepted result 0x000044B1
[2018-04-23 23:25:55] Pool difficulty: 50625
[2018-04-23 23:25:55] Pool sent a new job (ID: 119620357058010)
[2018-04-23 23:25:58] Pool accepted result 0x0000EC14
[2018-04-23 23:26:03] Pool sent a new job (ID: 133028621855191)
[2018-04-23 23:26:11] GPU0:    1494.0 H/S [T: 51c, RPM: 3446, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU1:    1493.0 H/S [T: 51c, RPM: 3772, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU2:    1498.0 H/S [T: 48c, RPM: 3253, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU3:    1493.0 H/S [T: 47c, RPM: 3544, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU4:    1492.0 H/S [T: 47c, RPM: 3535, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU5:    1484.0 H/S [T: 48c, RPM: 3373, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] Total:   8954.0 H/S
[2018-04-23 23:26:12] Pool sent a new job (ID: 264038743241690)
[2018-04-23 23:26:13] Pool accepted result 0x0000CEB1
[2018-04-23 23:26:16] Pool accepted result 0x000102BE
[2018-04-23 23:26:21] Pool accepted result 0x0000B950
[2018-04-23 23:26:24] Pool difficulty: 75939



its not the miner your config/ clocking / volting settings sucks for 100%

Using OverDriveNTool:

[Profile_0]
Name=Vega64
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;925
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;905
Fan_Min=3000
Fan_Max=4900
Fan_Target=65
Fan_Acoustic=1500
Power_Temp=70
Power_Target=-25

And PowerPlay:

_1100MHz_HBM_905mv
Wrong Huh

Because using Cast XMR -->2055H/s





It looks like you are using default config.txt
Cast XMR automatically configures for you. For SRB, you need to change the intensity, worksize, and thread number until you find the ideal one.