I got this from Bitmain directly mid-march but because of a move across the country, I am just getting around to setting it up.

After FINALLY realizing that it wasn't shipped with an SD card, I imaged an SD card and put it in. Unfortunately, it is still doing absolutely nothing.

With the PSU off, I plug everything in (1 Ethernet and 9 six pin connectors. Then I flip the power on. Red lights at the back of the controller come on and the Orange and Green light around the Ethernet cable come on.

That's it. That's all it does. Sometimes the green light for the ethernet will blink a little, but I can't find it on my network and I even download additional apps to search the network for all IPs.

The Fault and Normal lights have been off and have never come on.

I've tried pressing IP Report. I've tried holding it down. I've tried plugging in the 8 power connectors on the hashing boards, turning it on, and then plugging in the connector for the control board. No change.

I've tried pressing reset. I've tried holding reset down for 5 seconds where Bitmain says the unit will restart itself (it doesn't).

And my network is simple. DHCP, no static IPs, no firewall that would block it... I've been able to hook up my Avalon miners with absolutely no problem. I've restarted the router, the modem, checked connections, changed ethernet cables, etc. etc. etc....

Really frustrated at this point and do not like the thought that I have to send this damn thing back to CHINA to get fixed.

If any of you have any ideas, I would really appreciate it.