Post
Topic
Board Hardware
Re: Antminer V9 4TH
by
suchmoon
on 25/04/2018, 20:47:55 UTC
The reset button on the V9's I have dont do anything. I can hold them down for over a mintue and still no beep. I formatted an SD card with FAT32 and copied the firmware files bitmain posted for the V9 Miner onto the SD card. I then inserted the SD card into the miner and turned it on. The fans started spinning at max and now both the red and green led are staying on. Ethernet light is flashing but nothing is showing up on my router. Any ideads?

Have you tried this:

https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C



Moderator's note: This post was edited by frodocooper to remove nested quotes.