Post
Topic
Board Mining (Altcoins)
Re: L3+ Does... literally nothing
by
Didley1JT
on 27/04/2018, 05:12:46 UTC
the issue is he put an sd card into it why?

They don't need one.

So he most likely killed it with the sd card hack.


@ op  I live in NJ  zip 07731 .

 I have 11 of these units.


Send me yours  I will try to rescue it for you.

Just let me know 1 thing


what is your router?

192.168.?.1

the questionmark  could be :

0
1
2
10

I will set it up for you to the pool of your choice if possible. or determine if you killed off the controller.

If you killed the controller  and the boards are good  I can send you one of my 11  and keep yours  plus a bit of coin to pay for the controller.


I read your post closely you have rasp pi's  for your avalon's

detach them  then try to see if it works..  I have had rasp pi's  fuck with other mining gear on my network.

I suspect  the controller is setting  the dhcp to the rasp pi  number.

I had to set both the controller and the rasp pi to static addresses.

Try  running the L3 with no avalon's running  and see if it shows.

I think the issue is caused by some ethernet switches.  and both things set to the same address fucking one up.

Hey, Phil. I tried imaging an SD card after fighting with it for over an hour. I wasn't running any other miners when trying to get the L3+ going (not even powered on or plugged in to the network).

I'm under warranty so I will will try one of the US repair centers. Just a giant pain in the ass.

I must have pulled up an old L3 setup guide because it showed putting an SD card in the slot.