Well... my 10k resistors came in today, switched out the 22k resistor for a 10k on one of my good units.

BFGMiner 3.6.0 - 2.82 GH/s - 0 HW Errors
CGMiner 3.8.0 - 2.51 GH/s

I only let it sit for about 10 minutes on each mining software, so going to let it run for awhile in BFGMiner now.

Before the installation of the resistor this unit was consistently at 2.2GH/s

EDIT:

Temperature at heat-sink: 27.8 C / 82 F
Temperature at chip: 37.7 C / 100 F