Re: Antminer L3+ OVERCLOCKED !!! HOT !!! full review with LOTs of pics

Be aware there a two different Hashboards actually.

https://support.bitmain.com/hc/en-us/articles/360002072833-L3-Different-Version-Comparison

Hashboard L3+ (S) is the old PCB and could handle Overclocking up to 600 MHs
Hashboard L3+ (N) is the new PCB and is very poor in Terms of Overclocking (around 540 Mhs only)

So be aware when overclocking newer L3+ they have changed the Boards somewhere in early 2018.

Hi Sakl,
I do have L3+ miners delivered in Feb 18 and was about to play with one when I stumbled on this post.

Miners are in a hosting centre so will have to wait for me to check which version hasboards they have but has anyone tried to overclock the Hashboard L3+ (N) and if so what speeds was achieved?

Hi there if you are using the new PCB i wont use more than 412M.
Thats around 540 MHash.

Thank you for the info about the board types, I have the newer (worse) type in my L3+.

Would this mean that using the OC of 412M is "pushing" the OC to the limit for this board type and therefore may/will compromise the chips etc in the long term?

Anyone have experience OCing the newer board type and had it running for the past few months?