2) Rejected share rates seem to be very high. Roughly 45% in my case. It doesnt appear that my profitability has been affected at the pool, but Id like some anecdotal feedback that others are seeing the same reject rates.
I'm having similar reject rate. Still showing ~700-800 H/s poolside so I'm not worried.
No Air Cond. My Basement is little cold still and that may be the reason and my chip temperature was always 30-35 degree before I removed the fan connector...but still 40-50 is still OK. All i am saying is just remove the exhaust fan connector and just try it for an hour...I see people are struggling so much to change the config or change the fans....Which I am saying is not required. Note the current chip temperature....switch off the miner...remove the exhaust fan connector...switch the machine ON and try for an hour....Just giving my experience and noise level is way far better....
I've been running it without the exhaust fan for ~24 hours, no problems, ~5 degrees hotter than before.
Cool..!!!! this confirms that is there only ~5 degree difference...Guys, whoever can remove the exhaust fan can remove and try....whoever doesn't want to remove the fans...just remove the exhaust fan connector and run the miner....You will be happy with the noise level...hope someone can sleep happily