Once connected, Go to Network Tab, then select WAN
Protocol: Static Address
IP4: 192.168.2.XXX (<-- same as the sticker on the miner)
IPv4 netmask: 255.255.255.0
IPv4 Gateway: 192.168.2.1
IPv4 Broadcast: blank
Use custom DNS servers: blank or 8.8.8.8
Then click on Save & Apply. Please wait for 1-2 minutes to be updated.
i have a router on 192.168.1.1, should i set that as the gateway, or must it be 192.168.2.1 on the antminer? (and/or on the router?)
@goxed: you can use the PCI-e connectors of the 4-pin ATX connectors (2x2 sized, not the 4x1 molex). My psu has 2 of these 4 pin ATX cables i intend to use