what kind of results can one expect? we talking 50watt or 5 ?
Sorry found answer in original thread.
I am going to ping phil to give it a whirl since I know he has a few L3+. Sadly all miner are in a hosting facility except for one lonely s9 that is pos and been in warranty 5 times. But the OP thread it was 600w vw 800w so that is a 20% saving.
Just got a pm to read this
I have multiple L3+ with the undervolt tool
using just the jstefanop tool on freq 359 hash rate of 470 I do 667 watts with minimum volts on all 4 boards. using a corsair ax1500i titanium
this is a savings of over 100 watts.
So my first question is can this scrypt use a lower volt setting then 0xfe?
..
Thanks for checking in. No, unfortunately 0xfe equals 254 and ist the highest undervolting you can set.
If you have 4x 0xfe set, there is nothing more you can do to save on energy (except lowering frequency further), this script doesn't help you then as it is about to find the highest undervolting setting where you miners still work reliably.
You could however get possibly more hashes/W if you increase the frequency to the point where you still can run them with 0xfe on all or most blades. And if you are willing to set a frequency where you do not get 0 errors on all chains with 0xfe, my script can help to find the highest possible setting with lowest possible errors.