[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000313] ps7-ttc #0 at df804000, irq=43
[ 0.000619] Console: colour dummy device 80x30
[ 0.000650] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040210] pid_max: default: 32768 minimum: 301
[ 0.040432] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040452] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042591] CPU: Testing write buffer coherency: ok
[ 0.042924] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042984] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043209] L310 cache controller enabled
[ 0.043229] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210363] Brought up 2 CPUs
[ 0.210383] SMP: Total of 2 processors activated.
[ 0.210391] CPU: All CPU(s) started in SVC mode.
[ 0.211053] devtmpfs: initialized
[ 0.213467] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214678] regulator-dummy: no parameters
[ 0.221924] NET: Registered protocol family 16
[ 0.224216] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226519] cpuidle: using governor ladder
[ 0.226532] cpuidle: using governor menu
[ 0.233952] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235478] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235492] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235607] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257191] bio: create slab at 0
[ 0.258619] vgaarb: loaded
[ 0.259318] SCSI subsystem initialized
[ 0.260259] usbcore: registered new interface driver usbfs
[ 0.260626] usbcore: registered new interface driver hub
[ 0.260875] usbcore: registered new device driver usb
[ 0.262098] media: Linux media interface: v0.10
[ 0.262256] Linux video capture interface: v2.00
[ 0.262501] pps_core: LinuxPPS API ver. 1 registered
[ 0.262513] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.262635] PTP clock support registered
[ 0.262989] EDAC MC: Ver: 3.0.0
[ 0.264039] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266890] DMA-API: preallocated 4096 debug entries
[ 0.266904] DMA-API: debugging enabled by kernel config
[ 0.266974] Switched to clocksource arm_global_timer
[ 0.287021] NET: Registered protocol family 2
[ 0.287694] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287752] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287837] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287885] TCP: reno registered
[ 0.287902] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287934] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288169] NET: Registered protocol family 1
[ 0.288527] RPC: Registered named UNIX socket transport module.
[ 0.288539] RPC: Registered udp transport module.
[ 0.288548] RPC: Registered tcp transport module.
[ 0.288556] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288569] PCI: CLS 0 bytes, default 64
[ 0.289001] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291026] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293122] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293312] msgmni has been set to 967
[ 0.294098] io scheduler noop registered
[ 0.294112] io scheduler deadline registered
[ 0.294153] io scheduler cfq registered (default)
[ 0.305885] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305905] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.430666] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.997949] console [ttyPS0] enabled
[ 1.002225] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.009856] [drm] Initialized drm 1.1.0 20060810
[ 1.026782] brd: module loaded
[ 1.036158] loop: module loaded
[ 1.045626] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.051762] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.059697] libphy: XEMACPS mii bus: probed
[ 1.064066] ------------- phy_id = 0x3625e62
[ 1.068797] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.077409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084040] ehci-pci: EHCI PCI platform driver
[ 1.091302] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.098161] usbcore: registered new interface driver usb-storage
[ 1.105007] mousedev: PS/2 mouse device common for all mice
[ 1.111126] i2c /dev entries driver
[ 1.118098] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.123579] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.129512] Xilinx Zynq CpuIdle Driver started
[ 1.134354] sdhci: Secure Digital Host Controller Interface driver
[ 1.140570] sdhci: Copyright(c) Pierre Ossman
[ 1.144841] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.151667] mmc0: no vqmmc regulator found
[ 1.155677] mmc0: no vmmc regulator found
[ 1.196996] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205706] usbcore: registered new interface driver usbhid
[ 1.211210] usbhid: USB HID core driver
[ 1.215918] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222219] nand: Micron MT29F2G08ABAEAWP
[ 1.226184] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232125] Bad block table found at page 131008, version 0x01
[ 1.238353] Bad block table found at page 130944, version 0x01
[ 1.244403] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250189] Creating 3 MTD partitions on "pl353-nand":
[ 1.255278] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263354] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270672] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279625] TCP: cubic registered
[ 1.282856] NET: Registered protocol family 17
[ 1.287573] Registering SWP/SWPB emulation handler
[ 1.293442] regulator-dummy: disabling
[ 1.297788] UBI: attaching mtd1 to ubi0
[ 1.823612] UBI: scanning is finished
[ 1.835243] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.842324] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.849087] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.855752] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.862630] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.868610] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.875717] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1134783803
[ 1.884760] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.893977] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.893983] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.897943] ALSA device list:
[ 1.897947] No soundcards found.
[ 1.914313] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.943441] UBIFS: recovery needed
[ 2.833994] UBIFS: recovery completed
[ 2.837707] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.843628] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.852762] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.862647] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.867686] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.878985] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.886157] devtmpfs: mounted
[ 2.889310] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 3.747521] random: dd urandom read with 0 bits of entropy available
[ 4.137013]
[ 4.137013] bcm54xx_config_init
[ 4.747010]
[ 4.747010] bcm54xx_config_init
[ 7.747843] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.753931] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 22.145692] In axi fpga driver!
[ 22.148813] request_mem_region OK!
[ 22.152154] AXI fpga dev virtual address is 0xdf9fc000
[ 22.157295] *base_vir_addr = 0x8c510
[ 22.173150] In fpga mem driver!
[ 22.176217] request_mem_region OK!
[ 22.179811] fpga mem virtual address is 0xe2000000
[ 22.976379]
[ 22.976379] bcm54xx_config_init
[ 23.606313]
[ 23.606313] bcm54xx_config_init
[ 26.606873] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 26.612893] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 949.942350] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 805c34041540881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[2] has core num=1
Chain[5] ASIC[42] has core num=1
Chain[5] ASIC[57] has core num=5
Chain[5] ASIC[60] has core num=15
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[10] has core num=1
Chain[6] ASIC[15] has core num=3
Chain[6] ASIC[20] has core num=2
Chain[6] ASIC[23] has core num=1
Chain[6] ASIC[38] has core num=1
Chain[6] ASIC[52] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[30] has core num=10
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,37,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1351 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1751 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 805c34041540881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[5] speed=5880
get fan[2] speed=6000
get fan[5] speed=5880
get fan[2] speed=6000
get fan[5] speed=5880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[2] has core num=1
Chain[J6] ASIC[42] has core num=1
Chain[J6] ASIC[57] has core num=5
Chain[J6] ASIC[60] has core num=15
Chain[J7] has core num in PIC
Chain[J7] ASIC[10] has core num=1
Chain[J7] ASIC[15] has core num=3
Chain[J7] ASIC[20] has core num=2
Chain[J7] ASIC[23] has core num=1
Chain[J7] ASIC[38] has core num=1
Chain[J7] ASIC[52] has core num=15
Chain[J8] has core num in PIC
Chain[J8] ASIC[30] has core num=10
miner total rate=13605GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:5 max freq=643
Chain:5 min freq=643
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:6 max freq=643
Chain:6 min freq=643
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:7 max freq=631
Chain:7 min freq=631
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Detect a bad chip=60 on chain[5], fixed to 400M
Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:5 max freq=643
Chain:5 min freq=643
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Detect a bad chip=52 on chain[6], fixed to 400M
Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:6 max freq=643
Chain:6 min freq=643
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:7 max freq=631
Chain:7 min freq=631
max freq = 643
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:38 remote:-86 offset:-101, will fixed offset=27
New offset Chain[5] chip[244] local:38 remote:-86 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset=62,0,0,0,0,0,37,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:34 remote:-93 offset:-98, will fixed offset=27
New offset Chain[6] chip[244] local:34 remote:-93 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset=62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
Chain[J8] use default temp chip[244]
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[7] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[7] chip[244] local:-64 remote:0 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=00
single board rate=4540 voltage limit=890 on chain[5]
last_testpatten_highest_pcb_temp=57 too low, fix voltage=900 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 900
retryFlag=1 will set the voltage limited on chain[5], change voltage=900
now set pic voltage=74 on chain[5]
single board rate=4539 voltage limit=890 on chain[6]
last_testpatten_highest_pcb_temp=57 too low, fix voltage=900 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 900
retryFlag=1 will set the voltage limited on chain[6], change voltage=900
now set pic voltage=74 on chain[6]
single board rate=4525 voltage limit=890 on chain[7]
last_testpatten_highest_pcb_temp=57 too low, fix voltage=900 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 900
retryFlag=1 will set the voltage limited on chain[7], change voltage=900
now set pic voltage=74 on chain[7]
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=907 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[02]=907
core[005]=3
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643
freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643
freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643
freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57451
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26195
last_nonce_num:79436
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=911 asic[05]=911 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[04]=911
core[073]=7
asic[05]=911
core[073]=7
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643
freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643
freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643
freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57454
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26219
last_nonce_num:113529
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=561 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=891
asic[24]=912 asic[25]=912 asic[26]=911 asic[27]=912 asic[28]=867 asic[29]=912 asic[30]=161 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=909 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=911 asic[43]=911 asic[44]=909 asic[45]=912 asic[46]=912 asic[47]=908
asic[48]=912 asic[49]=482 asic[50]=905 asic[51]=912 asic[52]=911 asic[53]=846 asic[54]=523 asic[55]=902
asic[56]=904 asic[57]=912 asic[58]=912 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[12]=561
core[023]=7 core[029]=6 core[036]=7 core[047]=7 core[058]=5 core[068]=1 core[071]=7 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=1 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[23]=891
core[011]=4 core[032]=7 core[056]=6 core[058]=2 core[072]=7 core[084]=7 core[106]=2
asic[26]=911
core[110]=7
asic[28]=867
core[001]=7 core[003]=4 core[004]=7 core[005]=7 core[006]=7 core[007]=7 core[008]=7 core[009]=7 core[010]=7 core[011]=7 core[012]=7 core[013]=7 core[014]=7 core[015]=7 core[016]=7 core[017]=7 core[018]=7 core[019]=7 core[020]=7 core[021]=7 core[022]=7 core[023]=7 core[024]=7 core[025]=7 core[026]=7 core[027]=7 core[028]=7 core[029]=7 core[030]=7 core[031]=7 core[032]=7 core[033]=7 core[034]=7 core[035]=7 core[036]=7 core[037]=7 core[038]=7 core[039]=7 core[040]=7 core[041]=7 core[042]=7 core[043]=7