Hello,
Just set up Asus B250 board with 13 AMD RX 580's, this is my 4th miner and 2nd AMD rig exactly like this one.
Weird thing happening...when I start the CM miner, it gives me nothing past the start up screen:
Eth: 1 pool is specified
Main Ethereum pool is eth.suprnova.cc:5005
DCR: 0 pool is specified
Then after 5 minutes (apperently) it says:
Miner cannot initialize for 5 minutes, need to restart miner!
Here is command line:
ethdcrminer64.exe -epool eth.suprnova.cc:5005 -ewal 74hawksfan.13th-fan -epsw 123 -esm 3 -allpools 1 -dbg 1
I have a funny feeling it's to do with Windows Defender, because since I've been trying to get this thing working for the last few days, it never popped up and asked for me to Allow it through the firewall...but idk for sure. I shut it off and still no action.
I would post a pic to make it easier but I cannot figure out how to do that :-)
Hey there,
So you have debug on, what do your logs tell you?
Try adding
-di 0
Start with GPU0 only, would be a good thing to try, as you could be overloading your PSUs.
If it's a new rig, never been running/stable, break it down, get through the init on one GPU, prove your config and basic hw/sw enviro, and take it from there.
jooi, what PSU are you using, and how many GPU on each, how many risers per cable?
Kudos on the 13gpu rig man, not so easy to get those stable.
Good luck.
footnote:
Try this.
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool ssl://eu1.ethermine.org:5555 -ewal wallet.rig -epsw x -di 0 -gser 1 -esm 0 -etha 0 -ethi 16 -eres 2 -erate 1 -estale 1 -asm 1 -platform 1 -y 1 -dcri 9 -wd 1 -ftime 5 -r 1440 -cclock 1200 -cvddc 900 -mclock 2100 -mvddc 850 -tstop 83 -tstart 50 -tt 60 -fanmin 40 -fanmax 100 -ttdcr 80 -ttli 80 -mode 1 -dbg 1 -altnum 3 -mport -3333 -mpsw whatever -logfile logs\