Hello I'm new here. I wanted to thank dogie, his Blade Setup Guide helped me out a lot.

I have three ASICminer Blades setup at the moment powered by a Thermaltake 550w PSU.

Four 120mm fans. Two on the front sucking air in and two on the back blowing air out.

Fan controller with thermistats.

I used an old PC case with conduit to mount the blades.

https://dl.dropboxusercontent.com/u/90286356/2013-12-07%2020.41.39.jpg

https://dl.dropboxusercontent.com/u/90286356/2013-12-03%2017.38.20.jpg

https://dl.dropboxusercontent.com/u/90286356/2013-11-30%2021.11.06.jpg

This photo was taken before I used the conduit mount.

https://dl.dropboxusercontent.com/u/90286356/2013-12-03%2017.36.57.jpg

I have two more 120mm fans on order which i'm going to mount on the side panels. Also thinking about buying three more blades.