Hello I wanted to thank dogie and many other members on this site, dogie's Blade Setup Guide helped me out especially.

I'll show off my rig if I may.

I have three ASICminer Blades setup at the moment powered by a Thermaltake 550w PSU.

Four 120mm fans. Two on the front sucking air in and two on the back blowing air out.

Fan controller with thermistats.

I used an old PC case with conduit to mount the blades. The side panels stay on the case usually.

https://dl.dropboxusercontent.com/u/90286356/2013-12-07%2020.41.39.jpg

https://dl.dropboxusercontent.com/u/90286356/2013-12-03%2017.38.20.jpg

https://dl.dropboxusercontent.com/u/90286356/2013-11-30%2021.11.06.jpg

This photo was taken before I used the conduit mount.

https://dl.dropboxusercontent.com/u/90286356/2013-12-03%2017.36.57.jpg

I have two more 120mm fans on order which i'm going to mount on the side panels.

My Raspberry Pi arrived today, might use that for the proxy. Also thinking about buying three more blades.

Overall I've had no hardware problems at all. One blade has been running 24/7 for about five weeks now and the other two for three weeks.