Hi!

GEKKO 2PAC / Linux 16.4 / cgminer 4.10.0 / HUB 2.0- 2A / FAN

How to underclock correctly?

My device works fine until 25M.

Under 25M, the device become "disabled" after few minutes.  

Enabled or reset it, in option menu, has no effect. Only manual unplug/plug can restart it correctly.

_______

If possible how to start immediately at the right frequency? Calibration of 100M up to the desired frequency is really bad..

Thanks.

EDIT.:
Received today a second Gekko and tested ok at minimal freq.  Means there is a hardware problem with the first Gekko.