Linux VPS FROZEN Daemon Installation Guide
Connect to your Linux VPS over SSH
Use your favorite terminal application on Linux or Putty/Bitvise clients on Windows
Connect to a terminal session with the Linux VPS
Update your system to the latest
From the terminal session, run the following commands

• sudo apt-get update
• sudo apt-get upgrade
• sudo apt install unzip

• sudo ufw allow OpenSSH
• ufw allow 9904/tcp
• ufw logging on
• ufw --force enable

Download the FROZEN Linux Daemon
From the terminal session, run the following command

• wget https://github.com/frznice/frozen/releases/download/1.1.0/ice-linux.zip

From the terminal session, run the following command

• unzip ice-linux.zip

Install FROZEN Linux Daemon Runtime Dependencies
From the terminal session, run the following commands

• sudo apt autoremove -y && sudo apt-get update
• sudo apt-get install -y libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev
• sudo apt-get install -y build-essential libtool autotools-dev automake pkg-config
• sudo apt-get install -y bsdmainutils software-properties-common
• sudo apt-get install -y libboost-all-dev
• sudo add-apt-repository ppa:bitcoin/bitcoin -y
• sudo apt-get update
• sudo apt-get install -y libdb4.8-dev libdb4.8++-dev

Create your FROZEN Linux Daemon configuration file
From the terminal session, run the following commands

• mkdir -p ~/.frozen
• nano ~/.frozen/frozen.conf

Now add the following lines to this file, replacing any < > field with your information
Note: If your setting up a Linux Hot/Cold Wallet, comment out the masternode entries

rpcuser=
rpcpassword=
rpcport=9905
listen=1
server=1
daemon=1
staking=0
rpcallowip=127.0.0.1
logtimestamps=1
masternode=1
port=9904
externalip=:9904
masternodeprivkey=
addnode=45.77.109.183
addnode=45.77.140.17
addnode=80.211.2.103
addnode=50.59.59.153
addnode=45.32.6.192
addnode=176.122.20.124
addnode=51.15.97.60
addnode=77.55.234.131
addnode=198.251.66.194
addnode=185.235.129.118
addnode=159.65.200.49
addnode=209.250.250.27
addnode=140.82.52.198
addnode=163.172.37.154

Copy and paste the addnode lines into the bottom of this file
Save and Exit (CTRL+X, Enter), Y, Enter

Wait for the FROZEN Linux Daemon to sync
From the terminal session, run the following commands

• ./frozend
• watch ./frozen-cli getinfo (CTRL+C to exit)

Compare the "Block Height" value with the latest from the FROZEN block explorer (45.77.230.21:3001).
When those are the same, your daemon is synchronized