Post
Topic
Board Mining (Altcoins)
Re: Bitmain Antminer X3 -- 220KH+ Cryponight - 550W
by
abdullaziz.said
on 31/05/2018, 09:00:05 UTC
I mined etn using fairhash and overclocked only to 475hz. My rate was almost always 276 Kh/s. I think it was at 150 MH at the time, didn't pay to close attention. I was doing around $28. a day. Now I'm experimenting with BCN from the UK. It's a pool that will share in the block if you find it. Already happened today. Both are low price coins so nothing earth shattering.  thx for the info.

Was that rate on the X3 dashboard or the mining pool website?

...

For the Bytecoin UK site that I'm using it's 139.8 MH/s for the Pool, and 367.5 MH/s for the network hash rate. From here-->  https://bytecoin.uk/#

Neither of those are your hashrate, both of those are specific to the pool/network. Your hashrate is below, in the section below where you enter your address and see your payouts and stuff.
Yes, my own Hash is 276 Kh/s.

I just started experimenting with DERO. My rate there is 300Kh/s with diff set at 6,000,000  The miner reports 274Kh/s while the dero web page reports my rate @ 420Kh/s

can you give me pool link and how did you link it to antMiner X3