Re: problem inno3d p104-100

Quote

Quote from: raashaad2010 on May 30, 2018, 10:31:59 PM

]

Hi mate, your core OC is too high, and 530 sol/s, seem like you run it at 100% power limit, It's a bit too much. For me, I always set power limit at 80% only.
You could test it at stock setting first. Then step-by-step OC with higher core. I mined with P104-100 as well, so far so good, for your interest, please check my tests in following thread. By the way, I think P104-100 could do better on mining ETH rather than mining ZEC.

https://bitcointalk.org/index.php?topic=2677496

Please what are the settings of eth

Hi mate, you could try with the following setting:

1. Claymore's Dual Ethereum Miner.
2. %75 power limit
3. +640 memory
4 -50 core

The hashrate should be around 39.5 - 39.7 Mh/s. I ever pushed memory to +800, but it's not stable, and getting crash sometimes. So I think OC memory should be less than +650. For power limit, if I set it to 85%, the hashrate will be around 40.5 Mh/s.