Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0
After months of mining without problems I messed it up again somehow 
I wanted to update to claymore 11.8 so I did the papmpi update script which was posted here around feb. When I recompiled miners somehow this took forever (>30mins) and seemed to loop so I decided to ctrl+c. Now somehow when reboot the mining process doesn't start anymore.
I tried ./nvOC patch but problem remains. Here is ./nvOC report
Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.0 - Community Release
nvOC (3main) : nvOC v0019-2.0 - Community Release
1bash ver : v0019-2.0.003
3main ver : v0019-2.0.006
5watchdog ver : v0019-2.0.011
6tempcontrol v: v0019-2.0.003
wtm switch ver: v0019-2.0.0011
Kernel : 4.4.0-97-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver : 390.59
Hardware info:
Motherboard : ASUS PRIME Z270-A Rev 1.xx
BIOS ver. : 1009 07/23/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3984604 kB
Mem Free : 2848876 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 74.5G disk 1 0 sata ATA TOSHIBA MK8052GS 0A
├─sda1 9M vfat part 1 0
└─sda2 74.5G ext4 part 1 0 /
VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: REMOTE
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
Temp Control ..............: YES
TARGET_TEMP ...............: 82
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 95
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 480
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 80
CORE_OVERCLOCK (global)....: 150
MEMORY_OVERCLOCK (global) .: 800
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: CUSTOM
CUSTOM_WORKERNAME .........: Luise01
plusCPU ...................: NO
ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0
COIN ......................: FTC
FTC_WORKER ................: Luise01
FTC_ADDRESS ...............: LuisenMi...
FTC_POOL ..................: hub.miningpoolhub.com
FTC_PORT ..................: 20510
FTC_INTENSITY .............: 23
PS: When I hit 'bash 3main' it seems like its working but this is only for ETH. iE FTC ccminer starts but doesn't mine. When I do 'bash 3main' I also have to ctrl+C the following error twice in order to continue:
I wanted to update to claymore 11.8 so I did the papmpi update script which was posted here around feb. When I recompiled miners somehow this took forever (>30mins) and seemed to loop so I decided to ctrl+c. Now somehow when reboot the mining process doesn't start anymore.
Code:
m1@m1-desktop:~$ screen -r miner
There is no screen to be resumed matching miner.
There is no screen to be resumed matching miner.
I tried ./nvOC patch but problem remains. Here is ./nvOC report
Code:
Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.0 - Community Release
nvOC (3main) : nvOC v0019-2.0 - Community Release
1bash ver : v0019-2.0.003
3main ver : v0019-2.0.006
5watchdog ver : v0019-2.0.011
6tempcontrol v: v0019-2.0.003
wtm switch ver: v0019-2.0.0011
Kernel : 4.4.0-97-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver : 390.59
Hardware info:
Motherboard : ASUS PRIME Z270-A Rev 1.xx
BIOS ver. : 1009 07/23/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3984604 kB
Mem Free : 2848876 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 74.5G disk 1 0 sata ATA TOSHIBA MK8052GS 0A
├─sda1 9M vfat part 1 0
└─sda2 74.5G ext4 part 1 0 /
VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: REMOTE
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
Temp Control ..............: YES
TARGET_TEMP ...............: 82
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 95
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 480
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 80
CORE_OVERCLOCK (global)....: 150
MEMORY_OVERCLOCK (global) .: 800
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: CUSTOM
CUSTOM_WORKERNAME .........: Luise01
plusCPU ...................: NO
ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0
COIN ......................: FTC
FTC_WORKER ................: Luise01
FTC_ADDRESS ...............: LuisenMi...
FTC_POOL ..................: hub.miningpoolhub.com
FTC_PORT ..................: 20510
FTC_INTENSITY .............: 23
PS: When I hit 'bash 3main' it seems like its working but this is only for ETH. iE FTC ccminer starts but doesn't mine. When I do 'bash 3main' I also have to ctrl+C the following error twice in order to continue:
Code:
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:3394): WARNING **: Binding 'F12' failed!
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:3394): WARNING **: Binding 'F12' failed!