Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.8 (Windows/Linux)
Hello,
I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.
I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.
OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas
I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.
I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.
OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas
Disable ULPS from regedit... also, just a little patience, it's not stuck, it just takes a little more time than usual but if you disable the ULPS then it should start faster
Just put 0 instead of 1 and do a restart.
I forget it to write, vut i also disable ULPS, i leave the miner running for 2-4 hours, and it gives, the claymore sign and pools again and again
Then maybe use DDU in Safe mode, disable ULPS again and see if it's working... if not, then is something else wrong there.
I have two rigs that have me baffled. Both are exact copies of each other, other than cards, but anyway all they do is https://ibb.co/cnLC8T which finally goes to https://ibb.co/gvf12o The 5 minute timer just goes on and on. I have set the EnableULPS to 0 but this prob persists. Any ideas? Sorry but the forum didn't like the image host. Dunno why, but you can copy the links to see the pics.
I have no ideea other than do a DDU in safe mode, install latest drivers and set ULPS to 0 for each card. Are AMD or Nvidia? You have this issue after latest Win10 update to v1803?