Perfect, I have the 5 cards on 1x to 16x risers of course powered via sata cables for each riser card. Look forward to learning something new. Thanks!
Oh wait, one more dumb question. My MB has only 2x PCIe 3.0x16 and 4x PCIe 2.0x1. The risers are 1x to 16x, will that be ok to run 5 FPGA's this way or would it cause stability issues in your opinion. Thank you again.
WARNING:
MAKE SURE YOU DO NOT OVER LOAD THE CABLES POWERING THE RISERS. THE GPUS DO NOT CONSUME MUCH POWER FROM THE PCI-E BUS. THE FPGA ARE DIFFERENT AND WILL DEFINITELY CONSUME ALL THE POWER IT CAN!!I'm going to post a great deal of videos and documentation before these ship. I'm going to make this really clear. Improper use can cause it to fail. I would recommend using the risers which allow a connection from a 6-Pin PCI-E cable.