Hey all

my Fault, The molex thing i was using came from the case :/ and when I built this PC I never wired in the case power.

We are now hashing on both boards

 HEXb 0: 540  840/ 840mV | OFF   / 0.000h/s | A:  0 R:  0 HW:0/0.00% WU:  0.0/m
 HEXb 1: 540  840/ 840mV | OFF   / 0.000h/s | A:  0 R:  0 HW:0/0.00% WU:  0.0/m
 HEXb 2: 540  840/ 847mV | 32.87G/27.24Gh/s | A:166 R: 64 HW:0/0.00% WU:387.2/m
 HEXb 3: 540  840/ 846mV | 42.42G/35.71Gh/s | A:228 R:104 HW:0/0.00% WU:503.9/m

Every time I start cgminer it does the above, does nto seem to be a problem but odd? Will let it settle for a while.

I tried that save and apply, same thing. I will go through the settings again. Something keeps stopping the cgminer proceess after about 2 minutes when i start it manually. Guessing there is an inbuilt check going on.

Update:: a few odd things with the TP link. firstly it is dissconnecting the USB every 30 seconds?

  105.520000] usb 1-1: USB disconnect, device number 6
[  105.860000] usb 1-1: new full-speed USB device number 7 using ehci-platform
[  125.980000] usb 1-1: USB disconnect, device number 7
[  126.310000] usb 1-1: new full-speed USB device number 8 using ehci-platform

And i have configured the cgminer settings in teh webpage to use hexb Yet it keeps trying to start it with --hexminerc-voltage instead of --hexminerb-voltage

Sat Dec 14 15:35:56 GMT 2013: cgminer exited status (1)
Sat Dec 14 15:35:56 GMT 2013: Sleeping for 10...
Sat Dec 14 15:36:06 GMT 2013: Starting cgminer
 [2013-12-14 15:36:06] /usr/bin/cgminer: --hexminerc-voltage: No values passed to hexminerc-voltage


------------- Victory!! ----------------

The reason why CGminer was not loading is that it expected teh default values of all a/b/c hex boards to be entered. I only entered HexB. I ended up changing /usr/bin/miner.sh and changing the param varaiable to only pass the Boptions over. win Win or if anyone else has the problem, just enter teh default values for all boards.

THANK YOU ALL