Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup
by
Qu4k3r
on 17/12/2013, 02:26:44 UTC
Hi there.

I need a little help.
I bought this BEB 10.7GHs Rev2 at amazon on 16-nov. It was delivered on time in USA but I live in Venezuela. So It was stored a couple of weeks at the currier company I use to import stuff to my country with other things I bought. I received it here in Venezuela just today.

It was factory sealed and packed properly with protective foam. Nice.

But it seems to be DOA.
It does nothing when I power it on, no warms up, no ethernet leds blinking.

I try these online guides but there was no success.
https://bitcointalk.org/index.php?topic=204030.0
https://bitcointalk.org/index.php?topic=205369.0
https://bitcointalk.org/index.php?topic=288787.0

I also check the power pins on the board with a multimeter and it's ok.
It shows 12 Vdc with polarirty in same direction showed in the board, so is not a power supply problem.

http://img703.imageshack.us/img703/3657/qf82.jpg
I also checked F1 box which seems to be a fuse location, it shows -12Vdc keeping polarity in same direction that power pins.

Although I can not read at a glance, thanks to macro photo I can do it now.

Reset: I guess these works like jumpers of any motherboard.
1-2 normal
2-3 factory reset

Debug: I guess this is a conection port for diagnostics with 7-segment display or something like that.
Tx: Transmission
Rx: Reception
GND: ground

MCLR: memory clear
+3.3v: obvious
PGD: no idea
PGC: no idea

F1: fuse box with a resistor I guess.

X12, X13, X14: Fan conections?

I emailed the seller but still no answer.
I can sent it back to the seller in the USA via fedex if necessary in order to get a replace.
But if I missed some step to get it work, please let me know.

Any sugestion to make this thing work properly?

Thanks in advance.-