Re: PhoenixMiner 3.0c: fastest Ethereum/Ethash miner with lowest devfee (Windows)
Hey Im hoping someone can help me out with an "out of memory" error I keep getting. I have a rig with the following build:
8 X NVIDIA 1070s
Asus H270-P motherboard
2X EVGA 750 PSUs
Windows 10
120 GB harddrive
8GB RAM
I am mining with PoenixMiner and using Nanopool and keep getting an error message. (I have 2 other rigs built the exact same and havent had any issues with them). Yesterday it was mining fine and the the program launched out, so I reset the rig and have been having issues since. I was able to get 7 GPUs running before but when I plugged in the 8th card, its giving me an error code. I tried switching out the risers and now am only able to get 6 cards working before the same error occurs -- "CUDA error in CudaProgram.cu:377 : out of memory (2)"
MSI Settings:
Power: 64
Temp: 67
Core Clock: 0
Memory Clock: 585
Any ideas??
8 X NVIDIA 1070s
Asus H270-P motherboard
2X EVGA 750 PSUs
Windows 10
120 GB harddrive
8GB RAM
I am mining with PoenixMiner and using Nanopool and keep getting an error message. (I have 2 other rigs built the exact same and havent had any issues with them). Yesterday it was mining fine and the the program launched out, so I reset the rig and have been having issues since. I was able to get 7 GPUs running before but when I plugged in the 8th card, its giving me an error code. I tried switching out the risers and now am only able to get 6 cards working before the same error occurs -- "CUDA error in CudaProgram.cu:377 : out of memory (2)"
MSI Settings:
Power: 64
Temp: 67
Core Clock: 0
Memory Clock: 585
Any ideas??
I have also 1070 gpus and i using 2x 850W PSU.
My MSI OC Settings are:
Power 65
Temp 76
Core Clock 0
Memory Clock 710 -> The only exception is one gpu because I had problems with this CUDA error. This gpu have memory clock 650 other settings are same.
try increasing your swap memory to at least 24 gig