Post
Topic
Board Mining (Altcoins)
Re: EWBF's Cuda Equihash Miner
by
brooklynite1
on 22/06/2018, 06:18:10 UTC
Short answer, impossible, 144.5 requires a larger amount of ram that the ASIC machines do not have
And how much RAM do they have?

Nondestructive analysis show that it is less than 128MB of SRAM. Unless there was a chip breakthrough, you can't fit more than 128MB of SRAM on a chip. EH 144_5 would require a minimum of 600MB SRAM to be competitive with GPUs.

Darn, it took the Crypto community 8 years to figure this out?

By the way, Renuzit, this miner realy FKs up my RIG, it gives a ton of rejected shares and then crashes and 4 out of 7 GPUs disappear. I typically have to reboot about 4 times to get the system to bring up all 7 GPUs. The resolution keeps bouncing around to 640x480 and

On the ZM miner where I used to mine BTCz up until the algo change, I had no issues whatsoever, my RIG would run a month without crashing even once, steady mining.

I just tried again and now my RIG is not responding. Even screws up teamviewer, turns into black screen.