Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive ASICMiner Cube Setup
by
Damnsammit
on 21/12/2013, 05:21:53 UTC
Basic question. Will this PSU work? It only has 1 X 6-pin.
http://www.newegg.com/Product/Product.aspx?Item=N82E16817339012
This is the one I have handy right now. Should I just go ahead and get a better PSU?


it's only got 15 amps on the 12v rail, i don't even know if that would run a cube in low mode.

Ok, so this one won't even give me 200W. WIll look into the posts here and find a PSU I can find quickly at store nearby. Please post any links if you know of any.

This one should be good.  It has one 12v rail with 34 amps.  http://www.newegg.com/Product/Product.aspx?Item=N82E16817438015
It's 1 X 6-pin ? I am looking to get one quickly from bestbuy or frys. This newegg one will take 2 days to get to me.

Guess I linked the wrong one.

Just get something with over 25amps and you should be good.

I'm running one on this, but it could definitely run two.  Been going 38GH+ ever since I powered it up.
http://www.newegg.com/Product/Product.aspx?Item=N82E16817371009