Re: [ANN] T-Rex miner for Nvidia GPU Linux (Lyra2z, Tribus, Phi1612)

Quote from: trexminer on June 14, 2018, 11:32:55 PM

Quote from: SimpleM on June 14, 2018, 11:06:14 PM

Thanks for your efforts.

I tried with 1070Ti, works very good and im getting about 2.9Mh/s. However on 1070 (MSI) ive tried various OC settings and lower intensity, but gets my screen flooded with the following error.

Code:

[2018-06-14 22:52:27] GPU monitoring enabled.
[2018-06-14 22:52:27] 6 miner threads started, using 'lyra2z' algorithm.
[2018-06-14 22:52:28] New difficulty: 1 (0.00391)
[2018-06-14 22:52:28] lyra2z block 71279, diff 5522.959
[2018-06-14 22:52:28] GPU#0: Intensity set to 17, 131072 cuda threads
[2018-06-14 22:52:28] GPU#1: Intensity set to 17, 131072 cuda threads
[2018-06-14 22:52:28] GPU#3: Intensity set to 17, 131072 cuda threads
[2018-06-14 22:52:28] GPU#5: Intensity set to 17, 131072 cuda threads
[2018-06-14 22:52:28] GPU#2: Intensity set to 17, 131072 cuda threads
[2018-06-14 22:52:28] GPU#4: Intensity set to 17, 131072 cuda threads
[2018-06-14 22:52:35] [ OK ] [A/R]: 1/1, diff: 0.010, 1560.61 kH/s
[2018-06-14 22:52:37] [ OK ] [A/R]: 2/2, diff: 0.006, 7806.30 kH/s
[2018-06-14 22:52:38] [ OK ] [A/R]: 3/3, diff: 0.006, 8007.13 kH/s
[2018-06-14 22:52:40] [ OK ] [A/R]: 4/4, diff: 0.014, 8413.97 kH/s
[2018-06-14 22:52:40] [ OK ] [A/R]: 5/5, diff: 0.020, 8821.47 kH/s
[2018-06-14 22:52:41] [ OK ] [A/R]: 6/6, diff: 0.006, 9023.73 kH/s
[2018-06-14 22:52:41] [ OK ] [A/R]: 7/7, diff: 0.004, 9145.72 kH/s
[2018-06-14 22:52:42] [ OK ] [A/R]: 8/8, diff: 0.019, 9227.28 kH/s
[2018-06-14 22:52:42] [ OK ] [A/R]: 9/9, diff: 0.004, 10.16 MH/s
[2018-06-14 22:52:42] [ OK ] [A/R]: 10/10, diff: 0.004, 10.16 MH/s
[2018-06-14 22:52:42] [ OK ] [A/R]: 11/11, diff: 0.004, 10.16 MH/s
[2018-06-14 22:52:43] [ OK ] [A/R]: 12/12, diff: 0.038, 10.36 MH/s
[2018-06-14 22:52:43] [ OK ] [A/R]: 13/13, diff: 0.025, 10.48 MH/s
[2018-06-14 22:52:44] [ OK ] [A/R]: 14/14, diff: 0.014, 10.69 MH/s
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#0: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#2: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#4: the launch timed out and was terminated
[2018-06-14 22:52:44] GPU#0: the launch timed out and was terminated

Hi SimpleM,

Error "the launch timed out and was terminated" usually indicates a problem with OC. Try using default intensity and no overclock at all to see if it's stable. And then slowly increase your OC. Just for reference, my 1070 are running stable at core +150, mem -500, power limit 110W. Yours may be different.

thanks for your reply, i've tried many different combinations of OCs on the MSI 1070 cards but i still get my screen flooded with errors. Same happens with the MSI 1060's i tried, i initially get about 1.6 hash per card but then after a few minutes it goes tits up.

I really do think the miner is still temperamental with some cards, as its working perfectly with my 1070tis but not for the 1070 or 1060s.

Regards