Re: New mobo=half hash rate? Wtf

I'm not sure your new mobo causing it.

Quote from: efabe420 on June 23, 2018, 12:06:37 PM

Just keep gettin code 43 on the 470 and low hash on the 580..cant figure it out.

Code 43 usually related to device hardware fails nor fails on the device driver, I'm not sure which one that was you facing. Maybe you need to try to re-flash your bios card, then reinstall the driver (try a few drivers versions)

Quote from: efabe420 on June 23, 2018, 12:06:37 PM

I tried swappin pcie slots and tried both by themselves, tried usin ddu and reinstalling the drivers.

Have you also tried using another riser?

As a standard operation for Polaris cards (modded), in case you forgot to do this:

Quote from: Vann on June 23, 2018, 12:21:11 PM

With a modded Bios on a RX 470/570, you need to use the pixel patcher to bypass the driver signature check any time you install or update the drivers. Download the pixel patcher, rename the executable to atikmdag-patcher-bios.exe, run it to patch the drivers and reboot.

https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

You also need to set all the cards to compute mode in AMD settings to implement the ETH epoch Dag size fix or you will get a reduced hash rate due to the Dag size on ETH.

https://support.amd.com/en-us/kb-articles/Pages/DH-024.aspx