Hello everyone!!

I just bought 2 rx vega, the fantastic powercolor rx vega 64 red devil and asus strix rx vega 56.

I've been reading so many guides (boring and extensive xD, and also a little complicated for people with few time to tweak them), so I would like to get as higher hashrate on monero as possible but without flashing bios or using powerplay tables.

So, my first question is:

- How much could I expect from them with stock bios but overclocked as high as possible?


And also:

- Which is the easiest mode to obtain highest hashrate? Maybe doing like mate "Hellae" (post #513)?


"Got my 3 x Vega 56, with original BIOS, doing 1800 H/s (XMR) @ 160W each. Total system on the wall: 570W (cause iGPU is active)

The system is stable, mining non-stop.

64 bios only helps to increase power consumption... unless you use the Soft Power Table at Windows regedit. This method, way more complicated, will push the V56 to stable 1880H/s with slightly less power (560W for 3 V56).

Wattman Settings (Blockchain Beta driver):
-30% GPU Frequency;
950 HBM Frequency;
Fans at 3500 - MAX (Ignore core thermals. What you need is to have the memory below 70º to keep the high hash rate. An undervolted gpu will be fresh enough to not auto raise the blower speed, hence not cooling the memory. At 25ºC ambient temperature I needed 3500RPM set at min speed);
Power Limit -20%.

Globaldrive settings (Blockchain Beta driver):
Crossfire disabled;
HBCC on, at max memory available (I'm with 16Gb RAM)."


Thanks in advance!!