Re: [OPEN] Group Buy #26 AsicMiner Cube Miners and USB Hubs

To clarify, the start signal is on the 4th pin, and it can be grounded to the 3rd or 5th pin, which
are both ground (among many others)

My paperclips just don't look good.

An insulated thermostat wire (18 AWG) works quite well (and looks good). Just make a very small "U" out of it (approximately 3/4" long) and then strip both ends about 1/4". It can be secured further with a tape over it:

http://i1330.photobucket.com/albums/w576/visdude/IMG_0011_zps0adefcc3.jpg

Do you have the correct pins?
According to this it's the 4thand 5th in.

http://www.corsair.com/en/blog/testing-your-corsair-power-supply