bounty for solving my issue 30 ZRX
Hello I am trying to figure out why my mining rig is not stable anymore. I have had it about 4 months and it has been running very stable. I am not sure what caused the instability now the only thing I can think of is a power outgage or windows update. Other than that I dont have an idea. I didn't do anything new to cause this error I didnt even catch it for a while that the PC was in a boot loop. Any help would be appreciated.
things I have done.
1.Tested each video card in claymore 1 by 1 none give any errors
2 Tests lots of cards together randomly it seems to only have an issue with the 7th card. Every time I use 7 the rig crashes.
3 Tried running different instances of claymore separating amd and nvidia still crashes at 7GPU threshold
4 reformatted PC
5. change pci slots around
6 tried different drivers
7. all this testing was done without OC on nvidia cards other than the custom bios on the AMD cards
8.changed between 16 and 20GB virtual memory
9.Tried using -gser 2
Hardware-All I got Brand new
MSI GTX 1070TI X3
EVGA GTX 1070
RED DEVIL RX580
XFX RX580
SAPPHIRE RX580
2X EVGA 1000P2 PSU
SAMSUNG EVO 850 256GB
WINDOWS 10
I3-7100
8GB HYPERX RAM
H110 PRO BTC MOBO
errors that I am getting
BSOD VIDEO_SCHEDULER_INTERNAL_ERROR
-----Windows Log Errors
Display driver nvlddmkm stopped responding and has successfully recovered.
Windows successfully diagnosed a low virtual memory condition. The following programs consumed the most virtual memory: EthDcrMiner64.exe (7912) consumed 17870532608 bytes, MsMpEng.exe (5516) consumed 109989888 bytes, and explorer.exe (3856) consumed 42541056 bytes.
The description for Event ID 14 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video22
ffffffff(ffffffff) ffffffff ffffffff
The message resource is present but the message was not found in the message table
Display driver nvlddmkm stopped responding and has successfully recovered.
---
claymore error
--
10:27:26:350 1fbc Setting DAG epoch #196...
10:27:28:271 1fbc Setting DAG epoch #196 for GPU1
10:27:28:271 1fcc Setting DAG epoch #196 for GPU3
10:27:28:271 1fc0 Setting DAG epoch #196 for GPU2
10:27:28:271 1fd4 Setting DAG epoch #196 for GPU4
10:27:28:271 1fb4 Setting DAG epoch #196 for GPU0
10:27:28:271 1fe0 Setting DAG epoch #196 for GPU6
10:27:28:271 1fdc Setting DAG epoch #196 for GPU5
10:27:28:271 1fbc Create GPU buffer for GPU1
10:27:28:271 1fcc Create GPU buffer for GPU3
10:27:28:271 1fc0 Create GPU buffer for GPU2
10:27:28:271 1fd4 Create GPU buffer for GPU4
10:27:28:271 1fb4 Create GPU buffer for GPU0
10:27:28:271 1fe0 Create GPU buffer for GPU6
10:27:28:271 1fdc Create GPU buffer for GPU5
10:27:28:553 1fb4 GPU0, OpenCL error -4 (0) - cannot create DAG on GPU
10:27:32:583 1eec Quit, please wait...
10:27:31:568 1fb4 Set global fail flag, failed GPU0
10:27:32:614 1fb4 GPU 0 failed
10:27:32:614 1fe0 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
10:27:32:614 1fd4 GPU 4, GpuMiner cu_kd failed 30 (16), unknown error
10:27:32:614 1fd4 GPU 4, Calc DAG failed!
10:27:32:739 1fc0 GPU 2, GpuMiner cu_kd failed 30 (17), unknown error
10:27:32:739 1fcc GPU 3, GpuMiner cu_kd failed 30 (16), unknown error
10:27:32:739 1fc0 GPU 2, Calc DAG failed!
10:27:32:739 1fcc GPU 3, Calc DAG failed!
10:27:33:098 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:098 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:192 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:192 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:286 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:286 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:364 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:364 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:442 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:442 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:770 1fbc GPU1 DAG creation time - 5319 ms
10:27:33:786 1fbc Setting DAG epoch #196 for GPU1 done
10:27:35:618 1fe0 Set global fail flag, failed GPU6
------
other error
9:57:12:488 1418 ETH: 1 pool is specified
09:57:12:503 1418 Main Ethereum pool is us2.ethermine.org:4444
09:57:14:003 1418 OpenCL platform: Intel(R) OpenCL
09:57:14:003 1418 OpenCL platform: NVIDIA CUDA
09:57:14:018 1418 OpenCL platform: AMD Accelerated Parallel Processing
09:57:14:018 1418 No AMD cards in the list.
09:57:14:706 1418 CUDA initializing...
09:57:14:721 1418 NVIDIA Cards available: 5
09:57:14:721 1418 CUDA Driver Version/Runtime Version: 9.2/8.0
09:57:14:831 1418 GPU #0: GeForce GTX 1070 Ti, 8192 MB available, 19 compute units, capability: 6.1 (pci bus 10:0:0)
09:57:14:846 1418 Total cards: 1
09:57:17:690 1418
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
09:57:18:721 1418 NVML version: 9.398.36
09:57:19:580 1418 SSL: Imported 28 certificates from local storage
09:57:19:595 1930 ETH: Stratum - connecting to 'us2.ethermine.org' <54.71.50.231> port 4444 (unsecure)
09:57:19:642 1930 sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["44dE6758adb294E113712.power", "x"], "id": 2, "method": "eth_submitLogin"}
09:57:19:673 1930 ETH: Stratum - Connected (us2.ethermine.org:4444) (unsecure)
09:57:19:689 1930 buf: {"id":2,"jsonrpc":"2.0","result":true}
09:57:19:689 1930 ETH: Authorized
09:57:19:705 1418 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
09:57:19:705 1930 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:57:19:736 1418 ETH: eth-proxy stratum mode
09:57:19:752 1418 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
09:57:19:752 1418 Watchdog enabled
09:57:19:752 1418
09:57:19:767 1930 buf: {"id":3,"jsonrpc":"2.0","result":["0xd27234a1446bd15500c13cbf4045b23a0dc111619c35cb89b852cb22884d04f8","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2a"]}
09:57:19:908 1bcc Setting DAG epoch #196...
09:57:20:814 1930 buf: {"id":0,"jsonrpc":"2.0","result":["0xbaebb1073f4ad7a2c3f8ffb25a163ca74121621ce85c1460d11ac5b1b4bad5f6","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2b"]}
09:57:20:814 1930 ETH: 07/04/18-09:57:20 - New job from us2.ethermine.org:4444
09:57:20:814 1930 target: 0x0000000112e0be82 (diff: 4000MH), epoch 196(2.53GB)
09:57:20:814 1930 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:57:20:814 1930 ETH: GPU0 0.000 Mh/s
09:57:22:267 1bcc Setting DAG epoch #196 for GPU0
09:57:22:267 1bcc Create GPU buffer for GPU0
09:57:22:282 1bcc CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
09:57:25:297 1bcc Set global fail flag, failed GPU0
09:57:25:297 1bcc GPU 0 failed
09:57:25:297 d40 Setting DAG epoch #196 for GPU0
09:57:25:313 d40 GPU 0, CUDA error 11 - cannot write buffer for DAG
09:57:25:328 1930 buf: {"id":0,"jsonrpc":"2.0","result":["0xbe640508867d1dc920830c67a0aa87e2cf9436557dceccc36d5f754ff58ce135","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2c"]}
09:57:25:328 1930 ETH: 07/04/18-09:57:25 - New job from us2.ethermine.org:4444
09:57:25:328 1930 target: 0x0000000112e0be82 (diff: 4000MH), epoch 196(2.53GB)
09:57:25:344 1930 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:57:25:344 1930 ETH: GPU0 0.000 Mh/s
09:57:28:328 d40 Set global fail flag, failed GPU0
09:57:28:328 d40 GPU 0 failed
09:57:29:796 1930 ETH: checking pool connection...
09:57:29:796 1930 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:57:29:843 1930 buf: {"id":3,"jsonrpc":"2.0","result":["0xbe640508867d1dc920830c67a0aa87e2cf9436557dceccc36d5f754ff58ce135","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2c"]}
09:57:39:794 1930 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x000000000000000000000000000000000000000000000000000000003f9c149a"]}
09:57:39:825 1930 ETH: checking pool connection...
09:57:39:825 1930 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:57:39:856 1930 buf: {"id":6,"jsonrpc":"2.0","result":true}
09:57:39:872 1930 buf: {"id":3,"jsonrpc":"2.0","result":["0xbe640508867d1dc920830c67a0aa87e2cf9436557dceccc36d5f754ff58ce135","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2c"]}
09:57:42:668 c78 GPU0 t=46C fan=0%
09:57:43:246 c94 em hbt: 16, fm hbt: 78,
09:57:43:246 c94 watchdog - thread 0 (gpu0), hb time 17938
09:57:43:246 c94 watchdog - thread 1 (gpu0), hb time 17938
09:57:43:246 c94 WATCHDOG: GPU error, you need to restart miner
Hello I am trying to figure out why my mining rig is not stable anymore. I have had it about 4 months and it has been running very stable. I am not sure what caused the instability now the only thing I can think of is a power outgage or windows update. Other than that I dont have an idea. I didn't do anything new to cause this error I didnt even catch it for a while that the PC was in a boot loop. Any help would be appreciated.
things I have done.
1.Tested each video card in claymore 1 by 1 none give any errors
2 Tests lots of cards together randomly it seems to only have an issue with the 7th card. Every time I use 7 the rig crashes.
3 Tried running different instances of claymore separating amd and nvidia still crashes at 7GPU threshold
4 reformatted PC
5. change pci slots around
6 tried different drivers
7. all this testing was done without OC on nvidia cards other than the custom bios on the AMD cards
8.changed between 16 and 20GB virtual memory
9.Tried using -gser 2
Hardware-All I got Brand new
MSI GTX 1070TI X3
EVGA GTX 1070
RED DEVIL RX580
XFX RX580
SAPPHIRE RX580
2X EVGA 1000P2 PSU
SAMSUNG EVO 850 256GB
WINDOWS 10
I3-7100
8GB HYPERX RAM
H110 PRO BTC MOBO
errors that I am getting
BSOD VIDEO_SCHEDULER_INTERNAL_ERROR
-----Windows Log Errors
Display driver nvlddmkm stopped responding and has successfully recovered.
Windows successfully diagnosed a low virtual memory condition. The following programs consumed the most virtual memory: EthDcrMiner64.exe (7912) consumed 17870532608 bytes, MsMpEng.exe (5516) consumed 109989888 bytes, and explorer.exe (3856) consumed 42541056 bytes.
The description for Event ID 14 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video22
ffffffff(ffffffff) ffffffff ffffffff
The message resource is present but the message was not found in the message table
Display driver nvlddmkm stopped responding and has successfully recovered.
---
claymore error
--
10:27:26:350 1fbc Setting DAG epoch #196...
10:27:28:271 1fbc Setting DAG epoch #196 for GPU1
10:27:28:271 1fcc Setting DAG epoch #196 for GPU3
10:27:28:271 1fc0 Setting DAG epoch #196 for GPU2
10:27:28:271 1fd4 Setting DAG epoch #196 for GPU4
10:27:28:271 1fb4 Setting DAG epoch #196 for GPU0
10:27:28:271 1fe0 Setting DAG epoch #196 for GPU6
10:27:28:271 1fdc Setting DAG epoch #196 for GPU5
10:27:28:271 1fbc Create GPU buffer for GPU1
10:27:28:271 1fcc Create GPU buffer for GPU3
10:27:28:271 1fc0 Create GPU buffer for GPU2
10:27:28:271 1fd4 Create GPU buffer for GPU4
10:27:28:271 1fb4 Create GPU buffer for GPU0
10:27:28:271 1fe0 Create GPU buffer for GPU6
10:27:28:271 1fdc Create GPU buffer for GPU5
10:27:28:553 1fb4 GPU0, OpenCL error -4 (0) - cannot create DAG on GPU
10:27:32:583 1eec Quit, please wait...
10:27:31:568 1fb4 Set global fail flag, failed GPU0
10:27:32:614 1fb4 GPU 0 failed
10:27:32:614 1fe0 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
10:27:32:614 1fd4 GPU 4, GpuMiner cu_kd failed 30 (16), unknown error
10:27:32:614 1fd4 GPU 4, Calc DAG failed!
10:27:32:739 1fc0 GPU 2, GpuMiner cu_kd failed 30 (17), unknown error
10:27:32:739 1fcc GPU 3, GpuMiner cu_kd failed 30 (16), unknown error
10:27:32:739 1fc0 GPU 2, Calc DAG failed!
10:27:32:739 1fcc GPU 3, Calc DAG failed!
10:27:33:098 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:098 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:192 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:192 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:286 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:286 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:364 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:364 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:442 1904 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
10:27:33:442 1904 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
10:27:33:770 1fbc GPU1 DAG creation time - 5319 ms
10:27:33:786 1fbc Setting DAG epoch #196 for GPU1 done
10:27:35:618 1fe0 Set global fail flag, failed GPU6
------
other error
9:57:12:488 1418 ETH: 1 pool is specified
09:57:12:503 1418 Main Ethereum pool is us2.ethermine.org:4444
09:57:14:003 1418 OpenCL platform: Intel(R) OpenCL
09:57:14:003 1418 OpenCL platform: NVIDIA CUDA
09:57:14:018 1418 OpenCL platform: AMD Accelerated Parallel Processing
09:57:14:018 1418 No AMD cards in the list.
09:57:14:706 1418 CUDA initializing...
09:57:14:721 1418 NVIDIA Cards available: 5
09:57:14:721 1418 CUDA Driver Version/Runtime Version: 9.2/8.0
09:57:14:831 1418 GPU #0: GeForce GTX 1070 Ti, 8192 MB available, 19 compute units, capability: 6.1 (pci bus 10:0:0)
09:57:14:846 1418 Total cards: 1
09:57:17:690 1418
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
09:57:18:721 1418 NVML version: 9.398.36
09:57:19:580 1418 SSL: Imported 28 certificates from local storage
09:57:19:595 1930 ETH: Stratum - connecting to 'us2.ethermine.org' <54.71.50.231> port 4444 (unsecure)
09:57:19:642 1930 sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["44dE6758adb294E113712.power", "x"], "id": 2, "method": "eth_submitLogin"}
09:57:19:673 1930 ETH: Stratum - Connected (us2.ethermine.org:4444) (unsecure)
09:57:19:689 1930 buf: {"id":2,"jsonrpc":"2.0","result":true}
09:57:19:689 1930 ETH: Authorized
09:57:19:705 1418 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
09:57:19:705 1930 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:57:19:736 1418 ETH: eth-proxy stratum mode
09:57:19:752 1418 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
09:57:19:752 1418 Watchdog enabled
09:57:19:752 1418
09:57:19:767 1930 buf: {"id":3,"jsonrpc":"2.0","result":["0xd27234a1446bd15500c13cbf4045b23a0dc111619c35cb89b852cb22884d04f8","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2a"]}
09:57:19:908 1bcc Setting DAG epoch #196...
09:57:20:814 1930 buf: {"id":0,"jsonrpc":"2.0","result":["0xbaebb1073f4ad7a2c3f8ffb25a163ca74121621ce85c1460d11ac5b1b4bad5f6","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2b"]}
09:57:20:814 1930 ETH: 07/04/18-09:57:20 - New job from us2.ethermine.org:4444
09:57:20:814 1930 target: 0x0000000112e0be82 (diff: 4000MH), epoch 196(2.53GB)
09:57:20:814 1930 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:57:20:814 1930 ETH: GPU0 0.000 Mh/s
09:57:22:267 1bcc Setting DAG epoch #196 for GPU0
09:57:22:267 1bcc Create GPU buffer for GPU0
09:57:22:282 1bcc CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
09:57:25:297 1bcc Set global fail flag, failed GPU0
09:57:25:297 1bcc GPU 0 failed
09:57:25:297 d40 Setting DAG epoch #196 for GPU0
09:57:25:313 d40 GPU 0, CUDA error 11 - cannot write buffer for DAG
09:57:25:328 1930 buf: {"id":0,"jsonrpc":"2.0","result":["0xbe640508867d1dc920830c67a0aa87e2cf9436557dceccc36d5f754ff58ce135","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2c"]}
09:57:25:328 1930 ETH: 07/04/18-09:57:25 - New job from us2.ethermine.org:4444
09:57:25:328 1930 target: 0x0000000112e0be82 (diff: 4000MH), epoch 196(2.53GB)
09:57:25:344 1930 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:57:25:344 1930 ETH: GPU0 0.000 Mh/s
09:57:28:328 d40 Set global fail flag, failed GPU0
09:57:28:328 d40 GPU 0 failed
09:57:29:796 1930 ETH: checking pool connection...
09:57:29:796 1930 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:57:29:843 1930 buf: {"id":3,"jsonrpc":"2.0","result":["0xbe640508867d1dc920830c67a0aa87e2cf9436557dceccc36d5f754ff58ce135","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2c"]}
09:57:39:794 1930 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x000000000000000000000000000000000000000000000000000000003f9c149a"]}
09:57:39:825 1930 ETH: checking pool connection...
09:57:39:825 1930 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:57:39:856 1930 buf: {"id":6,"jsonrpc":"2.0","result":true}
09:57:39:872 1930 buf: {"id":3,"jsonrpc":"2.0","result":["0xbe640508867d1dc920830c67a0aa87e2cf9436557dceccc36d5f754ff58ce135","0x9d3fef9bc522aee668ac0c6f6b22cf92cd30916e8da6cc5ac3ebe0a64234d5ce","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5a1b2c"]}
09:57:42:668 c78 GPU0 t=46C fan=0%
09:57:43:246 c94 em hbt: 16, fm hbt: 78,
09:57:43:246 c94 watchdog - thread 0 (gpu0), hb time 17938
09:57:43:246 c94 watchdog - thread 1 (gpu0), hb time 17938
09:57:43:246 c94 WATCHDOG: GPU error, you need to restart miner